User manual

6
Set the correct address on the digital display, you are able to choose a value between 001 and 255.
When a DMX-signal is received, a blinking red dot on the display is active.
Working time: hour:
It is possible to see the total working time of this fixture, by activating this feature.
Test mode: test:
The unit will test all its internal programs.
Channel mode: Chnd
This mode changes the DMX channel mode between 8, 12 and 17. Each mode has its own
characteristics, which makes basic, medium or advanced control possible.
NOTE: At some point, mirror-motors and lenses will be identified by using the numbers 1, 2, 3 and 4.
The numbers apply from left to right. The most left mirror is mirror 1, the most right mirror is mirror 4.
This unit has the following DMX-channels and DMX-values:
8 channel DMX mode
Channel 1: Dimmer intensity
Start value
End value
Function
0
128
No function
128
255
Dimmer 0-100%
Channel 2: Strobe slow/fast (only works when CH1 is set to 128-255)
Channel 3: Select gobo (channel 4 must be set to off)
Channel 4: Select rotating gobo (channel 3 must be set to off)
Channel 5: Gobo rotation
Start value
End value
Function
0
127
No function
128
255
Gobo rotation
Channel 6: Gobo rotation speed slow/fast
Channel 7: Scan effect (movement presets)
Channel 8: Scan effect movement speed slow/fast
12 channel DMX mode
Channel 1: Select gobo for Mirror 1
Start value
End value
Function
0
7
No function
8
28
Gobo 1
29
49
Gobo 2
50
69
Gobo 3
70
90
Gobo 4
91
111
Gobo 5
112
131
Gobo 6
132
152
Gobo 7
153
173
Gobo 8
174
193
Gobo 9