User manual

Setting up the unit
To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet.
The fixture will start up and show the last chosen setting on the display. Usually, with a new product, this is
the DMX mode with the value set on 001.
The display shows several settings, each with the possibility to set several values.
Use the display and the menu buttons to set preferences, change settings and scroll through the menu.
“Enter” is used to save a certain setting or preset, press “Menu” for at least 2 seconds to discard the change
and return to the main menu.
The table below shows an explanation for every feature and value.
display Mode Function
ADDR DMX address setting A001-A512
SLND Master/slave mode Master (default)
Slave
AUTO AU1
AU2
AU3
AU4
AU5
AU6
AU7
AU8
AU9
AU10
AU11
Auto mode 1 / red
Auto mode 2 / green
Auto mode 3 / blue
Auto mode 4 / red + green
Auto mode 5 / red + blue
Auto mode 6 / green + blue
Auto mode 7 / red + green + blue
Auto mode 8 / RGB single color auto run
Auto mode 9 / RGB mix color auto run
Auto mode 10 / RGB strobe
Auto mode 11 / RGB fade
AUSP Auto speed SP1 – SP8
SOUN Sound active mode SOU1, SOU2 mode
ADDR: DMX address setting, used to determine the DMX starting channel. From this channel on, the fixture
will respond to values, corresponding with the amount of channels that the fixture is occupying. (For
example, when you set the starting address to value 003, the fixture will respond to channels 3, 4, 5 etc.)
SLND: When using the master/slave function, you need to connect 2 or more fixtures with XLR-XLR cable.
The first fixture in line needs to be set as master, the others as Slave. This way, the slaves will mimic the
behavior of the master fixture for wonderful synchronized lighting shows.
AUTO: Auto mode, select the mode + one of the internal programs for wonderful automatic light shows and
color selection. Select one of the static colors, or a jump/fade color mix.
AUSP: Automatic Speed selection, which is used to determine the rotation speed and color chase speed (if
needed) of the unit.
SOUN: Activate or disable the built-in sound controlled mode. This way, the fixture will respond to the beat of
the music.