User manual

Device overview

1. Moving mirror

2. Beam output with manual focus

3. Standing/hanging adjustable bracket

4. Ventilation slots

5. IEC Power inlet with integrated fuse holder

6. IEC Power outlet (used to link several fixtures)

7. Control panel display with MENU, UP and DOWN buttons

8. Sound sensitivity potentiometer

9. Safety eye, for optional safety cable

10. Built-in microphone for sound active mode

11. DMX input (3P XLR)

12. DMX output (3P XLR)

This unit is equipped with an adjustable focus, which makes it possible to sharpen the beam when used at

small or large distance. The focus is positioned just underneath the mirror, around the lens. Turn the focus

slightly left or right and see if the sharpness of the beam increases or decreases.