User's Manual

17
1. Connect antennas to RF ports of the ground unit.
2. Connect the remote controller’s PPM output to the serial port of the ground
unit if you want to use AYAAN’s command uplink.
3. If video view on a PC or a Laptop is desired, connect a PC or a Laptop to the
seriald port of the ground unit.
4. Connect a 12V DC power to the power port of the ground unit and turn on
the power.
5. If latest firmware is desired, connect the ground unit to a PC or a Laptop
using USB cable and run AYAAN AIRLYNK software to upgrade the
firmware of the ground unit to the latest one.