User's Manual

v. Use AYAAN AIRLYNK System

1. Connect antennas to RF ports of the air unit.

2. Connect camera ethernet output to serial port of the air unit.

3. Connect the flight controller telemetry port to the serial port of the air unit.

4. Turn on the camera and set the video format.

5. Connect a 12V DC power to the power port of the air unit and turn on the

power.

6. If latest firmware is desired, connect the air unit to a PC or a Laptop using USB

cable and run AYAAN AIRLYNK software to upgrade the firmware of the air

unit to the latest one.