Data Sheet

60
15. Tests II
Those tests are to do preferably after charging the robot (1 night).
Sensors tests
Go to manual mode
The robot has to stop when meeting an obstacle (except if this one is dusky)
Moving tests
Connect to the robot through internet (https://ubbo.cleverapps.io/users/sign_in) (Chrome recommended)
Try all movements.
Tilt test
Still with internet navigator, move the tilt using slider.
Connection stability test
Disconnect / reconnect several times.
Wiring check
Quickly check that all wires are plugged.
Option: Collage
When everything is working properly, it is recommended, with the glue gun to glue at the connections of all wire on
the cards, to avoid that they will disconnect or loosen.
Assembly of the cover plate