Data Sheet

52
12. Wiring II
Relay wiring
You must take the thin red wire from the mast cable and link it to red wire from the relay (RB_A1)
The thin yellow wire from the mast cable must be linked to W1.
Detailed explanation: the yellow wire is connected to the permanent 12V. When you push on the button (pushed-in
position), it makes contact between the thin yellow and the thin red wire. The thin yellow one turns from
«unconnected » to +12V. It will drive to command the RB , and consequently supplies the electronic boards in +12V
and the elements at the upper part of the mast in +5V