Data Sheet

3
Introduction :
This guide shows how to setup and to self-assembly the robot as a kit. It provides also explanations on its physical
functioning. The CD provided with the robot includes the source code as well as some explanation on how the software
works.
Some parts are pre-soldered, pre-drilled and other preparation operations to allow the assembly the robot with the
minimum of tools. Nevertheless, we suggest beginner makers to fully read the installation and operating instructions
before assembling the robot in order to clearly understand how it works. In this context, Udacity
(http://www.udacity.com) or OpenClassroom (https://openclassrooms.com) should be a useful link.
Critical elements such as electrical connections are repeated several times in order to avoid all connection
mistakes.
In case of any doubt, whatever it is on the robot assembly or on the supplied piece parts, you can contact Axyn
Robotique :
 by e-mail :
[e-mail]
 by phone :
[phone]
 by postal mail :
AXYN Robotique
Pépinière d’entreprises innovantes Michel Caucik
100 impasse des Houillères
13590 Meyreuil, PACA, France