Specifications

15
1.2.3 Multiple Registration Marks
Multiple registration marks are generally created when the print itself is skewed or if the labels
require intricate cuts. It may be advantageous to use a skew or scale registration mark when
multiple labels are created and cut in a single frame.
“Skew” and “Scale” marks are created in the same manner as the original registration mark but
located as follows:
1. The Skew registration mark should be located ush to the die-line farthest to the right and ¼”
down from the lowest die-line.
2. The Scale registration mark should be located ush to the die-line farthest to the left, and ¼”
above the uppermost die-line.
NOTE: Itisnotnecessarytoaddregistrationmarksforeach“label”withinaframe.Onlyoneset
of marks per frame are required.