Specifications
11
1.1.0 Installation of Axxis HS Digital Label Finisher
1.1.1 Setup Finisher
1.1.2 Connection to PC
1.1.3 Allen Datagraph Installation Disc
The i-Tech Axxis HS Finisher is a tabletop label nishing device. Once removed from its crate, place
the unit on a table that can support 200+ Lbs (90 kg). PLEASE USE CAUTION WHEN LIFTING:
The system weighs approximately 200 lbs. (91kg). Do Not lift system by the unwind/re-
wind mandrels.
Do not connect the Axxis HS nisher to the computer until isntructed to do so by the installation CD.
The nisher utilizes either USB interface or Ethernet connection to the computer.
The Axxis HS comes with an installation CD that will walk you through connecting your equipment to
your computer and installing software.
The Setup CD contains:
1. An installation program that walks you through connecting your Axxis HS nisher to your
computer.
2. The Remote Panel Utility program for managing nisher settings.
3. A current version of rmware. “Firmware” is software that controls the machine functions. The
rmware on this disk is provided for backup purposes and should not be installed on new machines.
4. The DirectCut printer driver. This driver been tested with AllenCAD, CorelDRAW (versions
10-x8), Adobe Illustrator (versions 10-CC), Flexisign, and PowerCAD. It should also work with any
program that sends vectors rather than bitmaps to the driver. The DirectCut printer driver allows
cutting directly from windows graphics programs without requiring additional software purchases.
Note: DirectCut requires ownership of Allen Datagraph Equipment to use. Requires: Windows
8, Windows 8.1, Windows 7, Windows Vista, or Windows XP. Updated versions of the DirectCut
printer driver is available on the tech support documents page at the Allen Datagraph web site at
http://www.allendatagraph.com/tech-support/online-documents.
5. During installation a test cut is performed to verify communication with the nisher. (no blade or
material necessary but system must be in Load state)
6. Users Manual and sample jobs.
7. A complete copy of the technical support section of the ADSI website at the time the machine
was shipped. To access this ofine copy of the web site answer no to question as to whether you
want software installed on this computer when runing install CD.