Owner`s manual

This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
• Only @STANDBY/ON, @PROGRAM <1 / t>, and
@STRAIGHT are effective while you are using the advanced
setup menu.
• No other operations call be made while you are using the
advanced setup menu.
• The advanced setup menu is only available ill the front panel
display.
1 Press @STANDBY/ON to set this unit to the
standby mode.
2
Press and hold @TONE CONTROL and
then press @STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Press @PROGRAM <1 It> to select the
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
4 Press @STRAIGHT repeatedly to change
the selected parameter setting.
5 Press @STANDBY/ON to confirm your
selection and set this unit to the standby
mode.
?_t
The settings you made are reflected next time you turn on this
unit.
• Speaker impedance :iii;i:::'i Mi:::'==
(U.S.A. and Canada models only)
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8_2 MIN, 6f_ MIN
• Select "8f2 MIN" to set the speaker impedance to 8 f_.
• Select "6f_ MIN" to set the speaker impedance to 6 f_.
Front(A or B)
Theimpedanceof each
8f.)MIN Center speaker must be 8_Qor
higher.
Surround
6f,)MIN
Front (A or B)
The impedance of each
Center speaker must be 6 _Qor
higher.
Surround
• SIRIUS Satellite Radio Parental Lock
code number reset :iii;:iii;i::i:i:::'ili..i
Use this feature to set the code number for the SIRIUS
Satellite Radio Parental Lock feature to the initial factory
setting.
Choices: RESET, CANCEL
• Select "RESET" to set the code number to the initial
factory setting.
• Select "CANCEL" to set the code number to the initial
factory setting.
Even if you set "SSR PIN" to "RESET", this unit does not unlock
the locked channels. The initial factory setting of the Parental
Lock code number is "0000".
76 En