Owner`s manual

Use the DIRECT mode to enjoy the high quality sounds of
the selected source. When the DIRECT mode is activated,
this unit plays back the selected source with the least
circuitry.
Press @DIRECT (or press @AMP and then
@DIRECT) to select "DIRECT".
• "TONE CONTROL" and "SOUND MENU" (see page 63)
settings (except for speaker level settings) are not effective.
• The fi'ont panel display automatically dims.
_%,._
While DIRECT mode is activated, the front panel display turns on
momentarily when all operation is performed.
Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.
_%,._
Speaker and headphone adjustments are stored independently.
Press @TONE CONTROL repeatedly to
select the high4requency response
(TREBLE) or the low-frequency response
(BASS).
Press @PROGRAM <1It:> repeatedly to
adjust the high4requency response
(TREBLE) or the low-frequency response
(BASS).
• ff you increase or decrease the high-frequency or the
low-frequency sound to an extreme level, the tonal quality of
the surround speakers may not match.
• TONE CONTROL is not effective when this unit is in the
DIRECT mode, or when MULTI CH is selected as the input
SOtlrce,
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
This operation will override the level adjustments made in
"AUTO SETUP" (see page 24) and "SP LEVEL" (see page 65).
1 Press @AMP and then press @LEVEL on
the remote control and then @A / V to select
the speaker you want to adjust.
2
3
F:{::;:(){..{TL Front left speaker
F:'{:;?.(.){".{T{:41 Front right speaker
('.i:[:.il{".{"i"[:.ilR Center speaker
'.::,W1"1":'. Subwoofer
'.i:.i;i.i{:;?.= L Surround left speaker
'.i:.i;i.i{:4'.= {:41 Surround right speaker
_%,-_
• The available speaker channels differ depending on the
setting of the speakers.
• When the video monitor is turned on, the "SPEAKER
LEVEL" adjustment menu appears in the video monitor.
Press @<:1 It:> to adjust the speaker output
level.
• Press @t:> to increase the value.
• Press @<:1 to decrease the value.
• Control range:-10 dB to +10 dB
Press @LEVEL to turn off the speaker level
adjustment display.
41 En