Owner`s manual

g-amq,N-qi
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch between input
jacks when more than one input jack is assigned to as the
same input source.
--'4'--
• We recommend setting the audio input jack select to "AUTO"
ill most cases.
• You can adjust the default audio input jack select of this unit by
using "AUDIO SELECT" ill "OPTION MENU" (see page 71 ).
Press @AUDIO SELECT (or press @AMP and
then @AUDIO SEL) repeatedly to select the
desired audio input jack select setting.
Available input sources
r Mumc_ Dw _Aux DTWCBL_OVD MD/CD-ReD T_N_ XM _r_1
/
H ,: .::;=i::_.L_ ,, H LJ i LJ
Currently selected audio input jack select setting
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 18) as the input
source.
Press @INPUT <1/I> repeatedly (or press
@AMP and then @MULTI CH IN) to select
MULTI CH.
"MULTI CH" appears in the front panel display.
Use "MULTI CH SET" menu in "INPUT MENU" to set the
parameters for MULTI CH INPUT (see page 69).
The input signals are amplified and output directly without sound
processing. Therefore, you cannot activate sound field programs,
the night listening mode, etc. while MULTI CH is selected as the
input source.
1:::1].]"i"i[.[i Automatically selects input signals in the
following order: (1) HDMI (2) Digital
signals (3) Analog signals
{"{[){"{[[ Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
([:([i{:::{'?:',.."([i{:::'"i' Selects only digital signals. When no
signals are input, no sound is output.
{:::{{"{{:::{[..()(:.ii Selects only analog signals. If no analog
signals are input, no sound is output.
This feature is not available when no digital input jacks
(OPTICAL, COAX[AL and HDMD are assigned. [n addition,
HDM[ is not available as an audio input jack select setting when
the HDM[ IN DVD and HDM[ IN DTV/CBL jacks are not used.
Use "INPUT ASSIGNMENT" in "INPUT MENU" to reassign
the respective input jack (see page 68).
34 En