Owner`s manual

|_iqllll:l"l_lqll"
Both FM and AM indoor antennas are supplied with this
unit. Connect each antenna correctly to the designated
terminals. In general, these antennas should provide
sufficient signal strength.
_.,_,._
See right for connection information of the supplied AM loop
antenna.
The AM loop antenna should be placed away from this unit.
The AM loop antenna should always be connected, even if all
outdoor AM antenna is connected to this unit.
A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality,
install an outdoor antenna. Consult the nearest authorized
Ymnaha dealer or service center about outdoor antennas.
Connecting the wire of the AM loop antenna
Openthelever Insert Close the lever
@
_.,_,._
The wire of the AM loop antenna does not have any polarity
and you can connect either end of the wire to AM or GND
terminal.
Assembling the supplied AM loop antenna
%.
Outdoor AM antenna
Use a 5 to 10 m (16 to 33
1:) vinyl-covered wire
extended outdoors fl'om a
window.
AM loop Indoor FM
antenna antenna
(supplied) (supplied)
(U.S.A. model)
Ground (GND terminal)
For maximum safety and minimum interference, connect the
antenna GND terminal to a good earth ground. A good earth
ground is a metal stake driven into moist earth.
The types of the supplied AM loop antenna is different
depending on the models.
Once all connections are complete, plug the power cable
into the AC wall outlet.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i:i
(U.S.A. model)
Power cable
20 En