Manualshelf

User Manual

ManualsBrandsAXXESS ManualsCar Electronics & GPSAXXESS - Wiring Harness for 2016 and Later Honda Civic LX Vehicles - Black/gray
12345678
XSVI-1731-NAV
®
3
Installing the XSVI-1731-NAV
With the key in the off position:
• Connect the XSVI-1731-NAV harness into the interface, and then to the harness in
the vehicle.
Attention! If the interface loses power for any reason, the following steps will need to be
performed again. Also, if installing an ASWC-1 connect it after you initialize and test the
interface/radio, with the key in the off position.
• Turn the key (or push-to-start button) to the ignition position and wait until the radio
comes on.
Note: If the radio does not come on within 60 seconds, turn the key to the off
position, disconnect the interface, check all connections, reconnect the interface,
and then try again.
• Turn the key to the off position, and then to the accessory position. Test all functions
of the installation for proper operation, before reassembling the dash.
Initializing the XSVI-1731-NAV