User Manual

2
APPLICATIONS CONNECTIONS TO BE MADE
Lexus
ES330 2004-2006
ES300 2002-2003
IS300 2002-2005
LS430 2001-2006
RX330 2004-2006
RX350 2007-2009
RX400H 2006-2008
SC430 2002-2010
Toyota
4-Runner (excludes Urban Runner) 2003-up
Avalon 2005-up
Camry 2007-up
Corolla 2005-2011
FJ Cruiser 2011-up
Highlander 2008-up
Matrix 2005-2012
Prius 2004-2011
Prius (3rd gen/PHV) 2012-up
Rav4 2004-up
Sequoia 2005-up
Sienna 2004-up
Solara 2004-2008
Tacoma 2005-up
Tundra 2006-up
Tundra (double cab) 2004-2005
Venza (without NAV) 2009-up
Venza (with NAV and
separate display) 2013-up
Yaris 2007-2011
From the 16-pin harness to the aftermarket radio:
• Connect the White wire to the left front positive speaker.
• Connect the White/Black wire to the left front negative speaker.
• Connect the Gray wire to the right front positive speaker.
• Connect the Gray/Black wire to the right front negative speaker.
• Connect the Green wire to the radio’s left rear positive speaker.
• Connect the Green/Black wire to the radio’s left rear negative speaker.
• Connect the Purple wire to the radio’s right rear positive speaker.
• Connect the Purple/Black wire to the radio’s right rear negative speaker.
• Connect the Blue/White wire to the amp turn-on/power antenna.
Note: The Blue/White wire must be connected or you will not hear sound from the factory
amplifier.
• The following wires on the 16-pin harness will not be used, tape up and disregard:
Red, Brown, Light Green, Blue/Pink, Green/Purple, Orange/White
• Connect the 16-pin harness to the TYTO-01.
Continued on the next page