User guide

Standard & Basic Keyset User GuideInter-Tel AXXESS

REMOTE PROGRAMMING

The Remote Programming feature allows a user to place a phone in do-not-disturb

mode (DND) or forward the station’s calls, either from another station or through

DISA. For your convenience, a pocket-sized Remote Programming guide is attached

to the card stapled in the middle of this guide.

To access to the Remote Programming feature:

— EITHER, Call your AXXESS DISA number (provided by your system adminis-

trator). If required, enter your DISA password.

OR, use any phone on the system.

—Enter

3 5 9

— Enter extension to be programmed.

— Enter the extension’s password followed by

. You can now use any of the

following features.

To change the station password using Remote Programming:

—Enter

3 9 2

— Enter the new password, followed by

— Enter the new password again for verification, followed by

To turn on Do-Not-Disturb:

—Enter

3 7 0

— Enter message number (01--20) and, if desired, enter the optional second-line

message text.

— Hang up.

To turn off Do-Not-Disturb:

Enter

3 7 1

and hang up.

To turn on Call Forward:

— Enter one of the following Call Forward feature codes.

— Enter an extension number or enter a trunk access code followed by an outside

telephone number.

— Hang up.

To turn off Call Forward:

Enter

3 5 5

andthenpress

and hang up.