User guide

Standard & Basic Keyset User Guide Inter-Tel AXXESS

Multilingual Capability

Your telephone system may provide a choice between English and Japanese prompts

and displays. An option in the database determines the language that will be used by

each phone. If your keyset is programmed for English, all displays appear in English

and all AXXESSORY Talk voice mail prompts are delivered in English (unless

changed, as outlined below). If programmed for Japanese, all displays appear in Kata-

kana characters and all voice prompts are played in Japanese (unless changed). By

default, all phones are set for English.

Keyset-programmed messages can include English or Katakana characters, or a com-

bination. In displayed lists, such as directories, the English characters are alphabetized

before the Katakana characters. Therefore, Katakana names will appear after the

English names.

To change the assigned language for your phone:

—Dial

3 0 1

to change between English and Japanese, as desired. Your display

shows the current language.

Station Password

This password is used for the Remote Programming feature described on the next page.

To change the station password from your station:

—Dial

3 9 2

— Enter your current password, followed by

. (At default it is your extension

number.)

— Enter the new password followed by

. You hear a confirmation tone.

— Enter the new password again for verification followed by

. You hear a con-

firmation tone.

To change the station password using remote programming: See next page.