User guide

Standard & Basic Keyset User GuideInter-Tel AXXESS
25
DO-NOT-DISTURB
Placing your keyset in do-not-disturb halts all pages and calls to your keyset (except
for queue callbacks, recalls, and direct ring-in calls). Other users calling your keyset
hear a repeating signal of four fast tones. Display keyset users also see the do-not-dis-
turb message you have selected.
There can be up to 20 different Do-Not-Disturb messages in your telephone system.
They can be changed by the system administrator, installer, or programmer. Your
customer service representative, trainer, or system administrator will give you a list
of Do-Not-Disturb Messages for your system. You can list them here for your conve-
nience:
01 _______________________ 11 _______________________
02 _______________________ 12 _______________________
03 _______________________ 13 _______________________
04 _______________________ 14 _______________________
05 _______________________ 15 _______________________
06 _______________________ 16 _______________________
07 _______________________ 17 _______________________
08 _______________________ 18 _______________________
09 _______________________ 19 _______________________
10 _______________________ 20 _______________________
To enable do-not-disturb:
—Press
DND
.
— Dial the desired 2-digit number for the message you wish to use or press
VOL
to scroll forward or
VOL
to scroll backward through the messages.
— If desired, customize the second display line by entering the desired numbers or
letters as described below:
•
Remain in numeric mode (MSG key unlit): Press the keypad keys to dial the
desired numbers. Press
#
for a hyphen (–), press
*
for a colon (:), press
FWD
to leave a space, or press
MUTE
to backspace.
Continued...