User guide

Standard & Basic Keyset User GuideInter-Tel AXXESS
15
STATION-TO-STATION MESSAGES
Leaving Messages
If you call a phone that is busy, does not answer, or is in do-not-disturb, you can use
the station-to-station messaging feature to let the other person know you called. There
are two messaging options:
•
Have the called party return your call. When the party you called responds to
the message indication, a call is automatically placed to your phone.
•
Leave a message with the called party’s message center. When the party you
called responds to the message indication, a call is automatically placed to his or
her message center instead of your phone. Sometimes the voice mail system is
programmed as the message center.
To signal that a message is waiting, a called keyset’s MSG key flashes and the display
shows the number of waiting messages.
The Basics
To leave a message (while on an intercom call):
—Press
MSG
.
—HangupOR wait for the message center to answer.
Options
To leave a message without placing an intercom call:
—Press
3 6 7
and dial the desired extension number.
To cancel a message that you left at another phone:
— While on hook at your keyset, dial
3 6 6
.
— Dial the extension number of the phone where you left the message.