User guide

Standard & Basic Keyset User Guide Inter-Tel AXXESS
10
OUTSIDE CALLS
Placing Outside Calls
The Basics
To place an outside call:
— While on or off hook, press
OUT-
GOING
.
— Dial the desired number. (If you see a request for an account code and hear a
single progress tone, you must dial an account code before you can place your
call.)
— When finished with the call, hang up.
To make an emergency call:
— Simply dial
9 1 1
to automatically place a call to the preset emergency num-
ber. (You do not have to press the OUTGOING key first.)
Options
Depending on how your system is programmed, you may be able to use one of the
following methods instead of pressing the OUTGOING key:
— Dial the Outgoing Call feature code — default is 8.
— Press an unlit CALL key (if you have one).
— Press an unlit LINE key or a LINE GROUP key (if you have one).
— Dial a Select Line Group feature code — defaults are 9201–9299 and 93000–
93107.
— Dial the Automatic Route Selection (ARS) feature code — default is 9200.
When dialing the number, you can use one of the following features:
— Outside Directory: To use the speed-dial directory, see page 21.
— Station Speed Dial: To use the station speed-dial feature, see page 19.
— System Speed Dial: To use the system speed-dial feature, see page 20.
— Redial: To redial the last outside number you dialed, see page 22.