User Manual

LC-BMRC-01

Installing the LC-BMRC-01

With the key in the off position:

• Connect the LC-BMRC-01 harness into the interface, and then to the vehicle.

• Re-insert the fuse back into the fuse holder.

Attention! If the interface loses power for any reason, the following steps will need

to be performed again. Also, if installing an ASWC-1 connect it after you initialize

and test the interface/radio, with the key in the off position.

• Turn the key (or push-to-start button) to the ignition position and wait until the

radio comes on.

Note: If the radio does not come on within 60 seconds, turn the key to the

off position, disconnect the interface, check all connections, reconnect the

interface, and then try again.

• Turn the key to the off position, and then to the accessory position. Test all

functions of the installation for proper operation, before reassembling the dash.

Initializing the LC-BMRC-01