Manualshelf

Quick Start Guide

ManualsBrandsAXXESS ManualsCar Electronics & GPSAXXESS - Steering Wheel Control / Data Interface Adapter for Select Ford, Lincoln, Mazda and Mercury Vehicles - Black
12345678
5
REV. 7/11/2019 INSTAXTC-FD1
TROUBLESHOOTING
1.
LED
Light
Reset
Button
QR Code Scan Here
If the interface fails to function, press
and release the reset button, then
repeat the programming process
from step 4 to try again.
Further troubleshooting steps and
information can be located at:
axxessinterfaces.com/product/AXTC-1-FD1
2.
Note: If the LED light shows Solid Green for Pass (indicating everything
programmed correctly), yet the steering wheel controls don’t work, check to
ensure that the 3.5mm jack is plugged in, and also plugged into the correct
jack on the radio. Once corrected, press the reset button, then program again.
Final LED Feedback
At the end of programming the LED light will turn Solid Green which indicates
programming was successful. If the LED light didn’t turn
Solid Green, reference the
list below to understand which programming
section the problem may stem from.
Solid Green
Slow Red Flash
Slow Green Flash
Solid Red
Pass
Fail
Pass
Fail
Pass
Pass
Fail
Fail
LED Light
Radio
Programming
Section
Vehicle
Programming
Section