Quick Start Guide

ManualsBrandsAXXESS ManualsCar Electronics & GPSAXXESS - Steering Wheel Control / Data Interface Adapter for Select Chrysler, Dodge, Jeep, Mitsubishi and RAM Vehicles - Black

AXTC-CH013

INSTALLATION INSTRUCTIONS

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Applications............................................................2

Connections

LDSWCX-6502 ......................................................3

LDSWCX-6522 .......................................................4

Programming .........................................................5

Troubleshooting .....................................................6

Chrysler SWC (Steering Wheel Control)

and Data Interface 2004-up

APPLICATIONS

• Provides accessory power (10-amp)

• Provides wires for multimedia

radios (park brake, reverse,

speed sense)

• Retains audio controls on the

steering wheel

• Designed to be compatible with

all major radio brands

• Auto detects vehicle type, radio

connection, and preset controls

• Ability to dual assign steering

wheel control buttons

• Retains memory settings even

after battery disconnection or

interface removal (non volatile

memory)

• Provides illumination output

• Micro-B USB updatable

• AXTC-CH013 interface • LD-SWCX-6502 harness • LD-SWCX-6522 harness • 3.5mm adapter

See inside front cover

Summary of content (8 pages)

PAGE 1
AXTC-CH013 INS TAL L ATION INS TRUC TIONS Chrysler SWC (Steering Wheel Control) and Data Interface 2004-up INTERFACE FEATURES • Provides accessory power (10-amp) • Provides wires for multimedia radios (park brake, reverse, speed sense) • Retains audio controls on the steering wheel • Designed to be compatible with all major radio brands • Auto detects vehicle type, radio connection, and preset controls • Ability to dual assign steering wheel control buttons • Retains memory settings even after battery di
PAGE 2
APPLICATIONS LD-SWCX-6502 APPLICATIONS Chrysler 300 Aspen PT Cruiser 2005-2007 2007 2006-2010 Dodge Caliber Charger Dakota Durango Magnum Ram 1500 Ram 2500/3500 Ram Chassis Cab 4500/5500 2007-2008 2006-2007 2005-2007 2004-2007 2005-2007 2006-2008 2006-2009 2008-2010 2 LD-SWCX-6522 APPLICATIONS Jeep Commander Compass Grand Cherokee Patriot 2006-2007 2007-2008 2005-2007 2007-2008 Mitsubishi Raider 2006-2007 Chrysler 200 300 Aspen Sebring Town & Country 2011-2014 2008-2010 2008-2009 2007-2010 2008-2
PAGE 3
LD-SWCX-6502 CONNECTIONS Reset Button Vehicle Connector LED Light Aftermarket Radio (radio’s features may vary) Front Rear View Rear AUX-IN SWC Sub 3.
PAGE 4
LD-SWCX-6522 CONNECTIONS Reset Button Vehicle Connector LED Light Aftermarket Radio (radio’s features may vary) Front Rear View Rear AUX-IN SWC Sub 3.
PAGE 5
PROGRAMMING 1. Open the driver’s door, and keep open during the programming process. 6. Green & Red LED 2. OFF Cycle the ignition on. Green LED RT STA ON ACC The LED light will go out, then once again quickly flash Green & Red while the interface programs itself to the vehicle. Once programmed, the LED light will go out again, then turn solid Green. 7. OFF 4. Locate the Volume Up button behind the steering wheel on the right hand side.
PAGE 6
TROUBLESHOOTING 1. If the interface fails to function, press and release the reset button, then repeat the programming process from step 4 to try again. LED Light Reset Button Final LED Feedback 2. At the end of programming the LED light will turn Solid Green which indicates programming was successful. If the LED light didn’t turn Solid Green, reference the list below to understand which programming section the problem may stem from.
PAGE 7
REV.
PAGE 8
AXTC-CH013 INS TAL L ATION INS TRUC TIONS Having difficulties? We’re here to help. Contact our Tech Support line at: 1-800-253-TECH Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.