Product Datasheet/Brochure

AX-SVT AX-SVT
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
AX-SVT AX-SVT
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 6/21/18 REV. 6/21/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
REV. 6/21/18 REV. 6/21/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
• Provides 12-volts DC output when voltage is at or above 13.5-volts DC
• Designed for vehicles that do not provide accessory (switched) power
• 10-amp fuse included for safety
• Provides accessory power (13.5-volts 10-amps)
• Delayed turn-off after vehicle has been turned off
• Provides 12-volts DC output when voltage is at or above 13.5-volts DC
• Designed for vehicles that do not provide accessory (switched) power
• 10-amp fuse included for safety
• Provides accessory power (13.5-volts 10-amps)
• Delayed turn-off after vehicle has been turned off
• Provides 12-volts DC output when voltage is at or above 13.5-volts DC
• Designed for vehicles that do not provide accessory (switched) power
• 10-amp fuse included for safety
• Provides accessory power (13.5-volts 10-amps)
• Delayed turn-off after vehicle has been turned off
• Provides 12-volts DC output when voltage is at or above 13.5-volts DC
• Designed for vehicles that do not provide accessory (switched) power
• 10-amp fuse included for safety
• Provides accessory power (13.5-volts 10-amps)
• Delayed turn-off after vehicle has been turned off
INTERFACE FEATURES
INTERFACE FEATURES
INTERFACE FEATURES
INTERFACE FEATURES
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
• Connect the Black wire to chassis ground.
• Connect the Yellow wire to battery power.
• Connect the Red wire to the aftermarket device's accessory (switched) power wire.
• Connect the Black wire to chassis ground.
• Connect the Yellow wire to battery power.
• Connect the Red wire to the aftermarket device's accessory (switched) power wire.
• Connect the Black wire to chassis ground.
• Connect the Yellow wire to battery power.
• Connect the Red wire to the aftermarket device's accessory (switched) power wire.
• Connect the Black wire to chassis ground.
• Connect the Yellow wire to battery power.
• Connect the Red wire to the aftermarket device's accessory (switched) power wire.
TOOLS REQUIRED
TOOLS REQUIRED
TOOLS REQUIRED
TOOLS REQUIRED
CONNECTIONS TO BE MADE
CONNECTIONS TO BE MADE
CONNECTIONS TO BE MADE
CONNECTIONS TO BE MADE
AX-SVT Accessory Provider
AX-SVT Accessory Provider
AX-SVT Accessory Provider
AX-SVT Accessory Provider
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.