Quick Start Guide

ManualsBrandsAXXESS ManualsCar Electronics & GPSAXXESS - Wiring Harness for Select Mercedes Vehicles - Black

1

2

3

4

5

6

7

3

REV. 5/11/2018 INSTAX-MC90132

With the key in the off position:

• Connect the AX-MC90132 harness to the

AX-MC90132 interface.

• Connect the AX-MC90132 harness to the

AX-MC90132 ampliﬁer interface.

• Remove the dust cover from ﬁber optic port

in the AX-MC90132 ampliﬁer interface.

• Connect the factory ﬁber optic cable into

the AX-MC90132 ampliﬁer interface.

• Connect the AX-MC90132 harness to the

wiring harness in the vehicle.

Note: The small 2-pin connector will

connect to the empty slot in the CAN

hub, which is located in the kick panel,

underneath the glovebox. (Figure A & B)

• Connect the ASWC-1 harness to the ASWC-1

interface, and then to the AX-MC90132

interface.

INSTALLING THE AX-MC90132 INTERFACE

(Figure A) (Figure B)