Installation Guide

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/8/18 INSTAX-HYKIA3-SWC
INSTALLATION INSTRUCTIONS
AX-HYKIA3-S WC
If you are having difficulties with the installation
of this product, contact our Tech Support line
either by phone at 1-800-253-TECH, or email at
[e-mail]. Before
doing so, look over the instruction booklet a
second time and ensure that the installation was
performed exactly as the instruction booklet
is stated. Have the vehicle apart and ready to
perform troubleshooting steps before contacting
Metra/Axxess Tech Support.
Dual assignment legend
Resetting the AX-HYKIA3-SWC
1. The Blue reset button is located inside the AX-HYKIA3-SWC interface, between the two connectors. The button is
accessible outside the AX-HYKIA3-SWC interface, no need to open the AX-HYKIA3-SWC interface.
2. Press and hold the reset button for two seconds, then let go to reset the AX-HYKIA3-SWC interface.
3. Refer to Programming from this point.
* Not applicable in this application
Function # Function
1 Not allowed
2 Not allowed
3 Seek-Up/Next
4 Seek-Down/Prev
5 Mode/Source
6 ATT/Mute
7 Preset-Up
8 Preset-Down
9 Power
Function # Function
10 Band
11 Play/Enter
12 PTT
13 On-Hook
14 Off-Hook
15 Fan-Up*
16 Fan-Down*
17 Temp-Up*
18 Temp-Down*
STEERING WHEEL CONTROL SETTINGS (CONT.)
TROUBLESHOOTING