User Manual

7
REV. 4/2/2018 INSTAX-HYKIA1-SWC
STEERING WHEEL CONTROL
SETTINGS (CONT.)
TROUBLESHOOTING
Dual assignment legend Resetting the AX-HYKIA1-SWC
1. Not allowed
2. Not allowed
3. Seek-Up/Next
4. Seek-Down/Prev
5. Mode/Source
6. ATT/Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12. PTT
13. On-Hook
14. Off-Hook
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
1. The Blue reset button is located inside the interface, between the two connectors. The
button is accessible outside the interface, no need to open the interface.
2. Press and hold the reset button for two seconds, and then let go to reset the interface.
3. Refer to “Programming the Interface” from this point.
* Not applicable in this application