User Manual

AUDIO LEVEL ADJUSTMENT

For vehicles equipped with steering wheel controls (vehicle must have a Source button

on the steering wheel):

• To enter ampliﬁer adjustment mode, press and hold the Source button for more than 3

seconds. While in ampliﬁer adjustment mode, the steering wheel controls will no longer

control the radio.

• Front/Rear Balance Adjustment:

• Press and hold Volume Up button to cycle from front to rear, and back to the front.

Release the Volume Up button when the desired settings is achieved.

• Driver Mode:

• To enable/disable Driver Mode, press the Track + button.

• Preset EQ:

• Press the Track Down button to cycle through the preset EQ settings: Normal, Spatial,

Electronics, Instrumental, Festival

• To return the steering wheel controls to normal operation, press the Volume Down button.

• The interface will save all changes to its internal memory when the ignition is switched off. The

settings will not be saved if power is disconnected from the interface.

For vehicles not equipped with steering wheel controls:

• Front/Rear Balance Adjustment:

• Press and hold the momentary button for more than 3 seconds to cycle from front to

rear, and back to the front. Release the momentary button when the desired setting is

achieved.

• Driver Mode:

• To enable/disable Driver Mode, press and hold the momentary button for 2 seconds.

Note:

Do not hold the momentary button longer than 3 seconds to avoid changing the

F/R Balance.

• Preset EQ:

• A short press of the momentary button will change the various Preset EQ settings:

Normal, Spatial, Electronic, Instrumental, Festival

• The interface will save all changes to its internal memory when the ignition is switched off. The

settings will not be saved if power is disconnected from the interface.