User Manual

CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-BM9112
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/8/18 INSTAX-BM9112
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the AX-BM9112 .......................................3
Programming the ASWC-1 interface .....................3
Audio level adjustment .........................................4
BMW Mini (R53) (with Harmon Kardon amplifier) 2001-2006
Provides accessory power
Retains R.A.P. (retained accessory power)
Retains audio controls on the steering wheel
Retains phone buttons (radio dependent)
Retains factory features: date, time, temperature display
Selectable audio options
Micro “B” USB updatable
• AX-BM9112 interface
• ASWC-1 interface
• AX-BM9112 harness
• ASWC-1 harness
Female 3.5mm connector with stripped leads

Summary of content (8 pages)