User Manual

2
CONNECTIONS TO BE MADEAPPLICATIONS
• If installing a front/rear camera, connect the Black wire labeled “GND”,
to the camera(s) ground wire.
• If installing a backup camera, connect the Red wire labeled “Reverse Camera 12v”,
to the backup camera power wire.
• If installing a front camera, connect the Red wire labeled “Front Camera 12v”,
to the front camera power wire.
• The Red wire labeled “Acc Power Output” is optional if a power source is required
while a camera is active.
• If installing a backup camera, connect the RCA jack labeled “Reverse Camera Video Input”
to the camera.
• If installing a front camera, connect the RCA jack labeled “Front Camera Video Input”
to the camera.
• If adding an HDMI input to the factory radio, connect an HDMI cable (Axxess part number
AX-HDCABLE, sold separately), to the port on the AX-AM-GM91 labeled “HDMI IN”.
FRONT CAM IN
REAR CAM IN
ACC PWR OUT
REAR CAM PWR
FRONT CAM
PWR
CAM GROUND
HDMI LVDS OUT
LVDS IN
AV IN
POWER
IN
(Connections Diagram)
CADILLAC (1)
ATS 2014-up
CTS 2014-up
CTS (coupe) 2014-up
Escalade 2015-up
SRX 2013-up
XTS 2013-up
CHEVROLET (2)
Colorado 2014-up
Impala 2014-up
Malibu 2016-up
Silverado 1500/2500/3500 2014-up
Suburban 2015-up
Tahoe 2015-up
Volt 2017-up
GMC (3)
Acadia/Denali 2017-up
Canyon/Denali 2015-up
Sierra 1500/2500/3500/Denali 2014-up
Terrain 2017-up
Yukon/Yukon XL/Denali 2015-up
HOLDEN (2)
Astra 2017-up
Barina 2017-up
Captiva 2017-up
Colorado 2017-up
Commodore 2017-up
Spark 2017-up
Trailblazer 2017-up
Trax 2017-up
Ute 2017-up
Volt 2017-up
OPEL VAUXHALL (2)
Insignia 2013-2017
Insignia Grand Sport 2017-up
(1) For models with an 8-inch CUE Infotainment system
(2) For models with an 8-inch MyLink radio
(3) For models with an 8-inch IntelliLink Radio