Quick Start Guide

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
Wire Color & Function: The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
Note: Be sure that all audio input connections are polarized or in
phase with each other. That is, the positive output wires from the
audio source need to be connected to the corresponding positive
input wires of the AX-ALOC700. The same goes for the negative
audio wires. Failure to do this will result in poor bass response and
low quality audio.
Adjusting the AX-ALOC700 for maximum performance: After
completing all of the necessary connections, turn the AX-ALOC700
adjustment pots all of the way down by rotating them completely
counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately ¾ maximum
volume. Select one of the adjustment pots on the AX-ALOC700 and
turn it slowly clockwise until you notice audio distortion and then
stop. Turn the remaining pot to the same position as the previously
adjusted pot. The audio set-up of the AX-ALOC700 is now complete
and ready to be enjoyed
.
Wire Color & Function: The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
Note: Be sure that all audio input connections are polarized or in
phase with each other. That is, the positive output wires from the
audio source need to be connected to the corresponding positive
input wires of the AX-ALOC700. The same goes for the negative
audio wires. Failure to do this will result in poor bass response and
low quality audio.
Adjusting the AX-ALOC700 for maximum performance: After
completing all of the necessary connections, turn the AX-ALOC700
adjustment pots all of the way down by rotating them completely
counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately ¾ maximum
volume. Select one of the adjustment pots on the AX-ALOC700 and
turn it slowly clockwise until you notice audio distortion and then
stop. Turn the remaining pot to the same position as the previously
adjusted pot. The audio set-up of the AX-ALOC700 is now complete
and ready to be enjoyed
.
Wire Color & Function: The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
Note: Be sure that all audio input connections are polarized or in
phase with each other. That is, the positive output wires from the
audio source need to be connected to the corresponding positive
input wires of the AX-ALOC700. The same goes for the negative
audio wires. Failure to do this will result in poor bass response and
low quality audio.
Adjusting the AX-ALOC700 for maximum performance: After
completing all of the necessary connections, turn the AX-ALOC700
adjustment pots all of the way down by rotating them completely
counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately ¾ maximum
volume. Select one of the adjustment pots on the AX-ALOC700 and
turn it slowly clockwise until you notice audio distortion and then
stop. Turn the remaining pot to the same position as the previously
adjusted pot. The audio set-up of the AX-ALOC700 is now complete
and ready to be enjoyed
.
AX-ALOC700 AX-ALOC700 AX-ALOC700
® ® ®
The AX-ALOC700 is designed to convert speaker level audio to line
level audio. This allows for the installation of line level products such
as amplifiers, EQs and crossovers on systems that do not have RCA
line level outputs.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion
Commonly Found On Other Brands of LOCs, 6:1 Step Down with
Variable Output, Detachable Input Plug, Gold Flashed RCAs,
Attractive & Durable Enclosure
The AX-ALOC700 is designed to convert speaker level audio to line
level audio. This allows for the installation of line level products such
as amplifiers, EQs and crossovers on systems that do not have RCA
line level outputs.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion
Commonly Found On Other Brands of LOCs, 6:1 Step Down with
Variable Output, Detachable Input Plug, Gold Flashed RCAs,
Attractive & Durable Enclosure
The AX-ALOC700 is designed to convert speaker level audio to line
level audio. This allows for the installation of line level products such
as amplifiers, EQs and crossovers on systems that do not have RCA
line level outputs.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion
Commonly Found On Other Brands of LOCs, 6:1 Step Down with
Variable Output, Detachable Input Plug, Gold Flashed RCAs,
Attractive & Durable Enclosure
2 Channel, Adjustable Line
Output Converter
2 Channel, Adjustable Line
Output Converter
2 Channel, Adjustable Line
Output Converter
® ® ®
1-800-221-0932 www.axxessinterface.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 3/16/17
1-800-221-0932 www.axxessinterface.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 3/16/17
1-800-221-0932 www.axxessinterface.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 3/16/17