User Manual

4
CONFIGURING THE AX-ADDCAM (CONT.)
• Under “Configuration”, configure the (4) video trigger inputs to the desired settings. Refer
to “Video trigger description” for more information.
• Under “Other Settings” located at the bottom of the page, configure switched 12V and VSS to
the desired settings.
• Once all selections have been configured, press “Write Configuration” to save the settings.
Video trigger legend
• Disable (will turn off the input)
• Backup Camera (dedicated backup camera)
• Left Blinker (will be used for activation)
• Right Blinker (will be used for activation)
• Control 1 (positive trigger activation)
• Control 1 (negative trigger activation)
• Control 2 (positive trigger activation)
• Control 2 (negative trigger activation)
• Control 3 (positive trigger activation)
• Control 3 (negative trigger activation)
• Control 4 (positive trigger activation)
• Control 4 (negative trigger activation)
• Auto (Reverse -> Drive) will activate once
that sequence is seen (only available for
video trigger 4)
Continued on the next page