Product Datasheet/Brochure

Product information sheet

METRA. THE WORLD’S BEST KITS.

™

1-800-221-0932 www.metraonline.com

REV. 5/3/2018 INFOAX-ADDCAM

AX-ADDCAM

• (4) Camera inputs

• Programmable 12V 5-amp switched output (configured through the Axxess Updater program)

• Reverse signal trigger generated via CAN bus communication of the vehicle

• Turn signal trigger generated via CAN bus communication of the vehicle

• (4) Programmable camera control wires (configured through the Axxess Updater program)

• VSS (Vehicle Speed Sense) input and output

• Can also be manually controlled, and used along with an aftermarket radio

• Micro “B” USB updatable

The Axxess AX-ADDCAM interface is a camera switching interface that will provide up to (3) additional camera inputs to the

factory radio, while still retaining the factory camera. With this interface a front camera, and also side cameras can be added

to the factory radio. The cameras function automatically*, no human interaction required, unless desired to do so. Axxess

has also created a line of vehicle specific “Plug & Play” harnesses for the AX-ADDCAM. These harnesses must be used along

with the AX-ADDCAM. The AX-ADDCAM can also be used if the factory system does not originally come equipped with a

backup camera, adding up to (4) cameras in this instance.

* Only applicable vehicles listed in the drop down menu in the Axxess Updater program will retain this feature.

Note: Some vehicles may not have the turn signal, and/or reverse signal available on the vehicles CAN-bus. For ve-

hicles that do not have those signals available, the interface will need to be manually controlled by analog triggers.

• AX-ADDCAM interface

• AX-ADDCAM harness

INTERFACE FEATURES

INTRODUCTION

INTERFACE COMPONENTS

PAGE 1
Product information sheet AX-ADDCAM INTRODUCTION The Axxess AX-ADDCAM interface is a camera switching interface that will provide up to (3) additional camera inputs to the factory radio, while still retaining the factory camera. With this interface a front camera, and also side cameras can be added to the factory radio. The cameras function automatically*, no human interaction required, unless desired to do so. Axxess has also created a line of vehicle specific “Plug & Play” harnesses for the AX-ADDCAM.