Installation manual

Introduction to the ASWC Interface
and Wiring Harness
OnthetopoftheASWCinterfacetherearethreepointsofinterest:
1) Theprogramming LED–flashesrapidlywheninautodetectmode,
flashesslowlyinmanualprogrammingmode.
2) Thereset button–Holddownbuttonfor3secondstostartauto
detectmode;holddownlongerthen10secondstostartmanual
programmingmode.
3) Theslide cover(USBPortCover)–Openthisuptorevealthe
USBupdateport.UsingtheUSB-CABupdatecableandtheAxxess
websiteyoucanmakesureyoualwayshavethelatestupdated
inventory.
Overview
USBPortCover ResetButton ProgrammingLED