Installation manual

22
ASWC-1 Troubleshooting
Resetting Original ASWC-1 Settings
1) Turntheignitiononandwait3seconds.
2) PresstheResetbuttonfor3secondsandthenrelease.
3) RefertotheProgrammingsection(pp.8-9)toprogramtheASWC-1.
4) OncetheLEDissolidtheASWC-1isresetandshouldbeoperating
withthedefaultsettings.
A. Vehicle LED Feedback (indicatedbyGreenLEDontheASWC-1)
1st LEDflashistheWhite/Green
2ndLEDflashistheYellow/Green
3rd LEDflashistheGreen/Orange
4th LEDflashistheGray/Red
5th LEDflashistheBlack/Green
6th LEDflashistheGray/Blue
7th LEDflashisthePink
Note (section A):
• Short flashes represent the steering wheel control wire(s) that
are not connected to the vehicle from the ASWC-1.
• Long flashes represent wire(s) that are connected to the vehicle.
ASWC-1 Troubleshooting
LED Feedback