Installation manual

10
Let’ssayyouhaveASWC-1programmedtoyourradioandyouwant
tochangethebuttonassignmentforthesteeringwheelcontrols.For
instance,youwouldlikeSeek UptobeMute.Followthestepsbelowto
remapthesteeringwheelcontrolbuttons:
1) MakesuretheASWC-1isvisible,soyoucanseetheLEDflashesto
confirmbuttonrecognition.
Tip: Turning off the radio is recommended.
2) Withinthefirst20secondsofturningtheignitionon,
pressandholdtheVolume Upbuttononthesteeringwheeluntilthe
LEDgoessolid.
3) ReleasetheVolume UpbuttonandtheLEDwillgoout;Volume Up
hasnowbeenprogrammed.
4) FollowthelistintheButtonAssignmentLegend(p.11),
toreferencetheorderinwhichthesteeringwheelcontrolbuttons
needtobeprogrammed.
Note: If the next function on the list is not on the steering wheel;
press the Volume Up button for 1 second, until the LED comes
on, and then release the button. This will tell the ASWC-1 that the
function is not available and it will move onto the next function.
5) Tocompletetheremappingprocess,pressandholdtheVolume Up
buttononthesteeringwheeluntiltheLEDontheASWC-1goesout.
ASWC-1 Installation
Remapping the SWC buttons