Installation manual

axxessinterface.com 800.221.0932
Oncealltheinformationabovehasbeenveriedandcorrect,referbacktothe2setsofledashes
duringtheautodetectsequence.Hereiswhattheashesstandfor:
LED Feedback
The1stseriesofledashesrepresentthewire(s)thatareconnectedtothevehiclefromtheASWC.
Shortashesrepresentthesteeringwheelcontrolwire(s)thatarenotconnectedtothevehiclefrom
the ASWC
Longashesrepresentthewire(s)thatareconnectedtothevehicle
1stledashispin#2(White/Green)ontheASWC
2ndledashispin#3(Orange/Green)ontheASWC
3rdledashispin#4(Green/Orange)ontheASWC
4thledashispin#5(Gray/Red)ontheASWC
5thledashispin#8(Black/Green)ontheASWC
6thledashispin#11(Gray/Blue)ontheASWC
7thledashispin#1(Pink)ontheASWC
Ifduringtheautodetectsequencetherewasnolongledash,justshortones,theASWCwasnot
connected to the correct wire in the vehicle or the incorrect wire was used on the ASWC. Double
check connections and the vehicle information sheet to verify that you have the correct wires con-
nected.
 The2ndsetofledashesrepresentswhatbrandradiotheASWCbelievesitisconnectedto.
Eachashisforadifferentradiomanufacturer.
1stledashisforEclipse
2ndledashisforKenwood
3rdledashisforClarion
4thledashisforSonyandDual
5thledashisforJVC
6thledashisforPioneerandJensen
7thledashisforAlpine*
8thledashisforVisteon
9thledashisforValor
*Note:IftheASWCashes7timesandyoudonothaveanAlpineradioconnectedtoitthatmeans
that the ASWC did not see any radio connected. Verify the 3.5mm connector is connected to the
SWC input on the radio.