Installation manual

3) Releasethe“VolumeDown”andtheLEDwillgo“Off”.Wearenow

inradioprogrammingmode.

4) Pressandreleasethe“VolumeUp”buttonforthedesiredradio

number(pleaserefertotheASWC-1legend).Foreachpressthe

redLED.Itwillgo“On”andthen“Off”whenreleasedforfeedback.

5) Whenthedesiredradiotypehasbeenreached,Pressthe

“VolumeDown”button.

6) TheLEDwillgoonandwillremainon(approximately3seconds).

The ASWC-1 is internally computing and storing this new

information.

7) TheLEDwillgo“Off”indicatingitiscompleted.

Note: If at any time the user fails to press any button for a period

of 10 seconds or more, this programing mode will abort.

Section 3: Troubleshooting