Owner`s manual

28
X2DMA500
Bluetooth
®
Operation
Receiving and Ending Phone Calls
During a Phone Call
Incomingphonecallswillautomaticallyappearonthedisplay
andaringtonewillbeheard.
Note:Thevolumeoftheringtonedependsonthevolume
leveloftheX2DMA500.Theincomingringtonemaynotbe
heardifthevolumeissettoalowlevelormuteisactivated.
•Press toreceivetheincomingphonecall.
•Press torefusetheincomingphonecall.
Duringanactivephonecall,press toendaphonecall.
Ifthephonecallwasreceivedwhenlisteningtomusicin
anothermode,theX2DMA500willresumetheprevious
mode.
Turnthevolume knobtoadjustthevolumelevelduringa
phonecall.Bluetoothmodehasaseparatevolumelevel
fromthemainvolumeofothermodes.TheX2DMA500will
rememberthevolumelevelinBluetoothmodeandalways
returntothelastvolumelevelforeachphonecall.
Press MUTEduringaphonecalltoturntheX2DMA500's
externalmicrophoneoff.PressMUTEagaintoresume
microphoneoperation.
Press DISPLAYduringaphonecalltotransferthecallfrom
theX2DMA500tothecellphone.PressDISPLAYagainto
toggletheaudiobacktotheX2DMA500.
Duringaphonecall,ifthereisasecondincomingcall,press
toplacethefirstcallonholdandswitchtothesecond
phonecall.Press againtoswitchbacktothefirstcall.
Duringaphonecall,whentherearenoadditionalincoming
calls,press toplacethecallonhold.Press againto
resumethephonecall.
Note:Audiotransfer,callwaitingandcallholdmustbe
supportedbythemobilephoneandserviceproviderto
functionproperly.
Receiving a Phone Call
Ending a Phone Call
Volume
Microphone Mute
Audio Transfer
Call Waiting
Call Hold