Specs

AX-4120TS
Four Channel Professional Amplifier
®
axxent e.K. · Technologiezentrum Herzbachtal · Zum Wartturm 15 · 63571 Gelnhausen
Fon: [phone] · Fax: [phone] · [e-mail] · www.axxent.de
Architect Specications
Four channel power amplier with constant voltage outputs (taps 50-, 70- and 100 V) and
additional low impedance output rated at 8 Ohms; output power 4 x 120 W at all constant
voltages and low impedance (8 Ohms), bridged ( 8 Ohms) 2 x 350 W; input XLR balanced;
outputs: Euroblock and binding posts (touch proof); variable speed fan cooling; indicators
for on/o, signal present and signal overload; control for gain adjustment; heavy duty
steel chassis and case, powder coated; detachable blind knob covers; on/o switch on rear
side; detachable power supply cable with IEC plug on rear side; dimensions 483 (19”) x
88 (2U) x 387 mm (w x h x d); net weight 13,6 kg. The amplier shall be an Axxent model
AX-4120TS.
LED Indicators
for on/o, signal present and signal overload
Controls
gain controls with detachable knobs
Power Supply
230 V AC, 50 Hz
Dimensions
483 (19" rack) x 88 (2U) x 387 mm (w x h x d)
Net Weight
13,6 kg
Output power (RMS, 1 kHz, 1% THD)
constant voltage 4 x120 Watt
low impedance (nominal 8 Ω) 4 x 120 Watt
low impedance bridge mode (8 Ω) 2 x 350 Watt
Input sensitivity
1 V
Input Impedance
20 kΩ, balanced
Total Harmonic Distortion (THD)
<0,07% @ 1 kHz
Frequency Response
20-20 000 Hz (+0/-3 dB)
Signal to Noise Ratio
>98 dB
Output Voltage
50-, 70- and 100 V @ nominal input voltage
Cooling
variable speed fan
Inputs
balanced XLR
Outputs
Euroblock and binding posts, touch proof
Technical Specications