Maintenance Guide

ABMAX CUSTOMER PREMISE EQUIPMENT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1
31
OF 42
3) Connect the two-wire power cord to the NIA. The power cord uses an IEC320-C7 type
connector (Figure 8-7 and Figure 8-8) Then insert the power cord connector from the NIA into
the nearest wall outlet.
Figure 8-7 Connect the power cord
Figure 8-8 Diagram of NIA’s IEC320-C7 type connector
Note: It is extremely important to connect the AC power to the NIA as the last step. Connecting AC
power prematurely can damage the CPE and lead to faulty behavior.