Maintenance Guide

Table Of Contents

ABMAX CUSTOMER PREMISE EQUIPMENT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1

OF 42

3) Using a shielded RJ-45 plug, terminate (attach plug) to the outdoor CPE Cat-5 cable per the

manufacturer's recommended specifications for plug attachment. (Recommended

manufacturer: AMP P/N 5-569552).

4) Insert the RJ-45 plug from the outdoor CPE into the RJ-45 receptacle inside the NIA

(Figure 8-3).

Figure 8-3 Connect the CPE (outdoor unit)

5) Lay the CAT-5 cable so it passes through the opening into the case between the NIA and the

cover. Replace and tighten the screw (Figure 8-4) to secure the access cover to the NIA.

Figure 8-4 Reassemble the NIA