Maintenance Guide

ABMAX CUSTOMER PREMISE EQUIPMENT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1
27
OF 42
8 Installing the NIA/Power Adapter Hookup
Install the ABMAX CPE’s NIA/Power Adapter as follows:
1) Remove the new NIA/Power Adapter from the installation kit.
2) Flip the NIA over and use a Philips screw driver to remove the screw in Figure 8-1
Figure 8-1 Remove access cover screw
Note: The NIA does not have a captive screw. Take care to retain this screw (Figure 8-2) when
opening the access cover on the adapter.
Figure 8-2 NIA access cover and non-captive screw