Maintenance Guide

ABMAX CUSTOMER PREMISE EQUIPMENT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1
18
OF 42
4.4 Installing On a Wall with Wood Siding
1) Place the mounting plate against the wall.
2) Using a level, be sure that the mounting pole is perpendicular to the ground. You may need to
use spacers, as shown in Figure 4-6.
3) Mark the hole locations for the drilled hole locations. Remove the mounting pole and set
aside.
4) Drill 1/8-inch holes in the places marked.
5) Use #10 or #12 wood screws to secure the mounting pole to the wall and tighten.
Figure 4-6 Mounting Pole on Clapboard Siding