Installation Manual
Table Of Contents
- 1 Preface
- 2 AB-MAX Product Overview
- 3 Pre-Installation
- 4 Installing the Mounting Poles
- 5 Radio Installation
- 6 Installing the Interconnect Cables
- 7 Grounding the System
- 8 Installing the NIA/Power Adapter Hookup
- 9.0 Configuring the ABMAX Access Point Base Station
- Appendix A: Glossary of Terms and Abbreviations
ABMAX ACCESS POINT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1
9
OF 39
2.3.1 AB-MAX System Architecture
Figure 2-1 and Figure 2-2 show an AB-MAX System’s typical deployment and network
architecture.
Figure 2-1 AB-MAX Typical Deployment
Figure 2-2 AB-MAX Typical Network Architecture
2.3.2 Base Station Function
The Base Station enables wireless communications between the Customer Premise Equipment
and the Wide Area Network (WAN). Base Station elements may include:
• Access Point
• Switch
Access
Po int
CPE
CPE
Access
Po int
Access
Po int
Up to 500 CPEs per AP
Eth
NOC Router
WAN
Eth Switch
Typically 6 Access
Points per Base Station
Base Station