Installation Manual
Table Of Contents
- 1 Preface
- 2 AB-MAX Product Overview
- 3 Pre-Installation
- 4 Installing the Mounting Poles
- 5 Radio Installation
- 6 Installing the Interconnect Cables
- 7 Grounding the System
- 8 Installing the NIA/Power Adapter Hookup
- 9.0 Configuring the ABMAX Access Point Base Station
- Appendix A: Glossary of Terms and Abbreviations
ABMAX ACCESS POINT INSTALLATION AND MAINTENANCE GUIDE VERSION 1.1
18
OF 39
Figure 5-2 Mounting Parts for an Outdoor Access Point
1) Place the outdoor Access Point on the mounting pole.
2) Align the pole clamp with the mounting holes.
3) Insert the mounting screws and hand tighten.
4) Rotate the outdoor Access Point so it is pointing in the correct direction.
5) Tighten the mounting screws.
Figure 5-3 Access Point Rear View