Installation Manual Part 2

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
9-3
To take advantage of this information, the AB-Access Subscriber Units contain an interface,
which allows the installer to properly align the unit. Once an SU is mounted in place and
roughly aligned using a compass, the installer can attach a computer to the terrestrial interface of
the SU and interact with the RSSI web page on the SU to perform alignment (reference Figures
9-1 and 9-2). Connecting to the SU and enabling the RSSI interface is performed in the manner
described in the following sections.
NOTE: The RSSI interface is best viewed using a screen resolution of at least 800x600 with 256
colors. Netscape Navigator is recommended as the viewing browser, reference following Figure
9-1 RSSI Sample Web Page.
9.6 Display The Security Page
1. From your Test PC, start up a web browser.
2. In the URL field, enter the default IP address of the AB-Access System (supplied by your
service provider (example,
http://192.168.3.2).
3. The Security screen appears as shown in Figure 9-1.
Figure 9-1 Security Screen
9.7 Optimize The Antenna Alignment
At the security screen, enter the Service Provider Identifier and Security Key. The key is
supplied by your service provider as a secure login.
Click
Next
. The Antenna Alignment screen appears as shown in Figure 9-2.