Installation Manual Part 2

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
7-1
7 Subscriber Unit Installation
TBD: Update the figure numbers etc. in this section an onwards.
7.1 Installation Overview
The Subscriber Unit installation steps are as follows:
1. Install the mounting pole and mount the outdoor Subscriber Unit (see Figure 6-1).
2. Install the indoor junction box.
3. Route the interconnect cable. Connect it to the outdoor Subscriber Unit and the indoor
junction box.
4. Ground both the outdoor Subscriber Unit and indoor junction box.
5. Perform initial startup and testing.
Figure 7-1 AB-Access Subscriber Unit Installation Overview
SECTION 7
Subscriber Unit Installation