Installation Manual Part 2

Company Proprietary
Adaptive Broadband
U-NII Product Installation Manual 05/29/2001
8-1
8 Indoor Junction Box
The indoor junction box/wall box consists of a PCB that inserts power into the CAT-5 cable and
provides secondary lightening protection. Photos of the indoor Junction Box are shown in
Figures 8-1 and 8-2.
Figure 8-1 Indoor Junction Box (Wall Plate Enclosure)
The indoor junction box can be wired for ATM25 or Ethernet interfaces. Note that the PCBs
may be housed in separate plastic boxes or mounted in a card cage. Table 8-1 describes the
cable legend to follow.
Note, Four pre-scored
notches that can be
removed for cable
insertion.
SECTION 8
Indoor Junction Box